Debugging methods for weighing and packaging machines

The debugging method of the weighing packaging machine mainly includes the following steps ‌ :

Youdaoplaceholder0 Check device status ‌ : Before debugging, it is necessary to check the overall status of the device first. This includes checking whether the sensors are damaged or aged, whether the position of the scale platform is appropriate, and whether there are any debris, dust or other factors in the hopper that affect the accuracy and precision of the measurement. ‌

Youdaoplaceholder0 Zero Adjustment ‌ : After powering on the packaging machine, press the zero adjustment button and wait for the display to show the zero value. Ensure that the zero value can be accurately displayed when there is no load, laying a foundation for subsequent debugging. ‌

Youdaoplaceholder0 Half weighing ‌ : Take out half of the item to be weighed and place it on the scale pan for weighing. If the weight displayed on the monitor differs significantly from the actual weight, accurate weighing can be achieved by adjusting the gain coefficient and offset of the electronic scale.

Youdaoplaceholder0 Full scale adjustment ‌ : Put all the items to be weighed onto the scale pan for weighing. If the weighed weight is inaccurate, the gain coefficient and offset need to be readjust to ensure accuracy under full load.

Youdaoplaceholder0 Parameter Settings ‌ : Set parameters such as target weight, feeding speed and packaging speed according to actual needs. The setting of these parameters will directly affect the accuracy of packaging and production efficiency. ‌

Youdaoplaceholder0 Calibration and adjustment ‌ : After setting the parameters, the packaging scale needs to be calibrated and adjusted to ensure accuracy under different loads. This includes zero-point calibration, load calibration and speed calibration.

‌

Matters to note during debugging ‌ :

Youdaoplaceholder0 Check the sensor ‌ : Make sure the sensor is not damaged or aged and is securely fastened and protected from impact. ‌

Youdaoplaceholder0 Platform stability ‌ : The entire weighing section should be fixed on a stable and reliable platform to avoid shaking due to external force. ‌

Youdaoplaceholder0 Environmental cleaning ‌ : Regularly clean the packaging scale and its surrounding environment to prevent dust and debris from interfering with the operation of the equipment.

Youdaoplaceholder0 Safe operation ‌ : When adjusting and maintaining the packaging scale, be sure to follow the operating procedures and safety specifications of the equipment to ensure personal safety and the stability of the equipment.